Natural Wood Boat Varnish
Flügger Natural Wood products are intended for the care and maintenance of wood. Revitalises and protects while maintaining the structure of the wood and keeping the grain visible.
Product DescriptionNatural Wood Boat Varnish is a urethane alkyd varnish specially for treatment on wood. Provides a robust, weather and salt water resistant surface. Natural Wood Boat Varnish is available semi-gloss or glossy.
UsageIndoors and outdoors for varnishing wood.
SubstrateMust be clean, dry, solid and suitable for surface treatment.
TreatmentClean previously painted surfaces with Natural Wood Wood Cleaner.
Previously varnished surfaces must be sanded matt.
Wipe with a hard-wrung cloth.
Untreated wood, outdoors, must be primed with Flügger 01 Wood Tex Priming oil.
The best result achieved by three treatments before use.
After priming, apply 3 coats of undiluted Natural Wood Boat Varnish.
Apply wet-on-wet, and finish by brushing in the same direction.
Condensation during drying / curing must not form.
Always apply test treatments to check and accept the adhesion and results.
Be AwareProtect freshly painted surface from adverse weather conditions.
Take appropriate measures against the effects of moisture and rainfall on freshly varnished surfaces.
The surface achieves maximum robustness when fully cured.
Environmental informationClean off the paint from tools and wash them with brush cleaner. Bring remains of fluent paint to the local recycling centre. Minimize your paint waste by pre-estimating how much paint you need. Keep the leftover paint for future use so you can effectively reduce the environmental impact.
Storage: Cool, frost free and tightly closed
Protection equipment: Painting: eye protection, gloves. Sanding: respiratory protection.
Nominal spreading rate (m2/l)
Max. humidity 80 % RH.
Dry to touch at 20°C, 60% RF (Hours)
Fully cured at 20c, 60% RF (Days)
Do not dilute
Cleaning of Tools etc.
Current TDS Version